Positiv kaross Renault Master 4x2 Dieselolja Euro 6 ny
Brådskande- 17.22 M³
- 3 sittplatser
- Garanti 24 månad
- Gdańsk
|
Huvudsaklig information
|
|
|---|---|
|
Materialgaranti
|
|
| Webbplatsref.: | 10699635 |
| Karosseri | Nyttobil med kyl |
| Underkaross | Positiv kaross |
| Märke | Renault |
| Sortiment (märke : Renault) | Master |
| Tillstånd | Ny |
| Datum för första registrering | 16/07/2026 |
| Materialgaranti | Ja |
| Garantins giltighetstid | 24 månad |
| Land | POLEN |
| Constructeur | Renault |
Materialets tillstånd |
|
|---|---|
| Energi | Dieselolja |
ATP-certifikat |
|---|
|
Fjädring / Axlar |
|
|---|---|
| Axlar | 4x2 |
Dimensioner |
|
|---|---|
| Volym | 17.22 m³ |
| Yta | 8.61 m² |
Tonnage |
|
|---|---|
| Totalvikt | 3.5 Ton |
Utrustning Nyttofordon Renault |
|
|---|---|
|
Ytterligare information |
|
|---|---|
| Typ av kylenhet | Elektrisk |
| Land (sortiment) | POLEN |
| CO2-utsläpp | 347 g/km |
| Antal sittplatser | 3 |
Egenskaper Renault Master |
|
|---|---|
| Styrning | Vänsterstyrd |
| Euro-standarder | Renault Euro 6 |
| Körsträcka | 16 km |
Vagnskorgens dimensioner |
|
|---|---|
| Karossens höjd | 2.0 meter |
| Karossens invändiga bredd | 2.05 meter |
| Karossens invändiga längd | 4.2 meter |
Växellåda och transmission |
|
|---|---|
| Växellåda | Manuell växellåda |
Motor |
|
|---|---|
| Effekt | 170 Skattehästkraft |
| Motorns effekt | 125 kW |
| Slagvolym | 1997 cm3 |
Hyttens utrustning |
|---|
|
Anmärkningar |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
Se allt
|
Anmärkningar |
|---|
|
Airbag package (FAB02 SABG0 ABCXL) driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
Huvudsaklig information
|
|
|---|---|
|
Materialgaranti
|
|
| Webbplatsref.: | 10699635 |
| Karosseri | Nyttobil med kyl |
| Underkaross | Positiv kaross |
| Märke | Renault |
| Sortiment (märke : Renault) | Master |
| Tillstånd | Ny |
| Datum för första registrering | 16/07/2026 |
| Materialgaranti | Ja |
| Garantins giltighetstid | 24 månad |
| Land | POLEN |
| Constructeur | Renault |
Materialets tillstånd |
|
|---|---|
| Energi | Dieselolja |
ATP-certifikat |
|---|
|
Fjädring / Axlar |
|
|---|---|
| Axlar | 4x2 |
Dimensioner |
|
|---|---|
| Volym | 17.22 m³ |
| Yta | 8.61 m² |
Tonnage |
|
|---|---|
| Totalvikt | 3.5 Ton |
Utrustning Nyttofordon Renault |
|
|---|---|
|
Ytterligare information |
|
|---|---|
| Typ av kylenhet | Elektrisk |
| Land (sortiment) | POLEN |
| CO2-utsläpp | 347 g/km |
| Antal sittplatser | 3 |
Egenskaper Renault Master |
|
|---|---|
| Styrning | Vänsterstyrd |
| Euro-standarder | Renault Euro 6 |
| Körsträcka | 16 km |
Vagnskorgens dimensioner |
|
|---|---|
| Karossens höjd | 2.0 meter |
| Karossens invändiga bredd | 2.05 meter |
| Karossens invändiga längd | 4.2 meter |
Växellåda och transmission |
|
|---|---|
| Växellåda | Manuell växellåda |
Motor |
|
|---|---|
| Effekt | 170 Skattehästkraft |
| Motorns effekt | 125 kW |
| Slagvolym | 1997 cm3 |
Hyttens utrustning |
|---|
|
Anmärkningar |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
Se allt
|
Anmärkningar |
|---|
|
Airbag package (FAB02 SABG0 ABCXL) driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Nyttobil med kyl Iveco Daily 35C
Nyttobil med kyl Iveco 72C18 DAILY
Negativ kaross Renault Trafic 1.6 DCi 125HP
Mono-temperatur Opel Vivaro